Preheating
The preform is irradiated with infrared high-temperature lamps to heat and soften the body of the preform. In order to maintain the shape of the bottle mouth, the mouth of the preform does not need to be heated, so a certain cooling device is required to cool it.
Blowing molding
This stage is to place the preheated preform (embryo) into the blow mold, inflate it with high pressure, and blow and pull the preform (embryo) into the required bottle. The mineral water bottle blowing machine combines the two operations of blowing together through the operation of the robot, eliminating the process of manually placing the preheated preform (embryo) into the blow mold, greatly speeding up the production rate.
Operation Specifications
- Before starting each shift, lubrication oil must be added to each moving part (manipulator, manipulator guide rail, mold opening and closing guide rail).
- The swing arm can be lubricated once every (3-4) days, the large and small chains of the heating machine can be lubricated once a month, and the main reducer and heating machine reducer are frequently checked for lack of oil. The main bearing can be lubricated once every 3 months.
- Before production, check whether each moving part is firm, whether the screws are loose and fall off, especially in places with strong impact force, and whether the belt transmission part is abnormal.
- Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal.
- Check whether each emergency stop switch, safety door switch, and protection device detection switch are normal.
- Check whether the heating head is feeding the embryo and the embryo drop part is working normally. If the embryo is not inserted in place, the nut of the embryo pressing device can be adjusted.
- Check whether the lamp tube is damaged or broken, and replace it in time.
- Check whether each pneumatic component is leaking and whether the movement is sensitive.
- Check whether the triplex has abnormal leakage, blockage, and whether the water cup is too full.
- When the solenoid valve of the mineral water bottle blowing machine is abnormal, it should be cleaned in time (clean once every 3.5 million bottles).
Taizhou Fupusi Machinery Co.,Ltd.- John Tao