Taizhou Fupusi Machinery Co.,Ltd. / John Tao / +86 186 6862 7050 / Johntao@Fupusi.com
PET bottle blowing machine works by heating and melting PET resin pellets, which are then forced into a mold cavity. The molten plastic is then cooled and solidified, and the bottle is ejected from the mold. The machine is typically equipped with a preform loader, a heating oven, a blowing station, and a bottle ejector. The preform loader loads the PET resin pellets into the heating oven, where they are melted and then forced into the mold cavity. The blowing station then applies pressure to the molten plastic to form the bottle, and the bottle ejector ejects the finished bottle from the mold.
PET Bottle Blowing Machine
Taizhou Fupusi Machinery Co.,Ltd. PET bottle blowing machine is ideal to manufacture different shapes and sizes of PET/PE/PC bottles. It is the most high-cost performance solution for large production requirements of plastic bottles. And this pet bottle molding machine is quite suitable for small and medium-scale projects. It is widely used in lots of industries, such as mineral water, pure water industry, beverage industry, cosmetic industry, pharmaceutical industry, cooking oil industry, liquid detergent industry, etc. A bottle blow machine is essential equipment for a complete manufacturing line in many industries.
What is PET bottle blowing?
Generally, there is a PET bottle blowing process when manufacturing a plastic bottle. And this process is usually finished by a bottle blowing machine. And there is a semi-automatic PET bottle blowing machine and a fully automatic PET bottle blowing machine. These machines can both complete the process of stretching and blowing. They have different features and advantages. If you are looking for a reliable bottle molding machine, it is necessary for you to clear your requirements.
Two Stage Bottle Moulding Machine
Performance features of Taizy PET bottle blow machine
Infrared light is mixed into the preheater to ensure that the PET bottle preform is heated evenly.
Mechanical arms are sedated to ensure that the mold is tightly closed under high temperature.
Pneumatic system consists of two parts: pneumatic acting part and blowing bottle part, in order to meet the different requirements of acting and blowing, it provides enough stable high pressure for blowing. It provides stable high pressure to blow large bottles with irregular shapes.
It is equipped with a silencer and oiling system for lubricating the mechanical parts of the machine.
Reasonable design and structure. The plastic bottle blowing machine is easy to operate and maintain.
Wide applications. It can make various PET bottles through replace different molds.
A brief introduction to plastic bottles
Today, more than 80% of bottles produced are for the beverage industry, the vast majority of which are made using two-stage technology. And the remaining 15% to 20% can choose either process and many of the decisions are actually driven by tool prices of less than 200 (m/year production is so many custom applications), and even buying four cavity single-stage tools to buy bottle perform is also difficult to prove its rationality and run on the double cavity and engine needs less capital spending In the past 10 years, the number of available bottles billet has increased dramatically all over the world. Because the performance is different from bottles, its transportation cost of it is cost-effective.
Plastic Bottles
How do PET blowing machines work?
Taizhou Fupusi Machinery Co.,Ltd. In short, automatic PET bottle blowing machine is intelligent. Currently, linear two-step blow molding machine mainly the whole blow molding process is divided into preheating and blow molding. The specific working principle is as follows.
The whole bottle blank transfer automatic feeder loads the bottle blank into the clamping position, and the clamping fixture takes the bottle blank out and enters the heating furnace.